Please note that these rules are provisional, and program support is still iterating. Please note the policies described below refer to large-scale resin/epoxy pour. Things like doing fills on tabletops. This is not the policy for smaller projects that can be cured on the drying curing racks used in Art and during Art workshops. Product …
Ace Makerspace has a set of tools for small resin casting. This post goes over what we have and the Member Use Guidelines for using them at Ace. These tools can be used with 2-part or UV Resin and with Ace’s collection of silicone molds. These tools are most often used with small silicon molds …
Ace Makerspace has a set of silicone molds that members can use*. This post goes over what we have and the Member Use Guidelines for using them at Ace. These molds can be used with cement, plaster, UV Resin, and 2-part epoxy resin. They are NOT food-grade molds. These molds are located upstairs in suite …
This post details the options available at the Leather and Lasers Art Workshop. These are the options that require pre-work before the workshop. There will be some options that don’t require customization also available during the workshop as well. Participant Instructions Choose up to 3 options from the design below Email your options to [email protected] …
Advanced Pour Painting This page corresponds to the Ace Maker Space Advanced Pour Painting Class. There is also a Pour Painting Tips and Techniques page with details about the corresponding Ace Maker Space class. Blending Colors You can blend different colors to make “new” colors for your paintings. You can blend them while mixing them, …
Ace Keeps art supplies available for members. Some has been donated and others supplied by Ace. Some supplies need to be replaced or paid for at time of use but they are clearly labeled.
