Remove all obvious trash including Glue bottles that were not capped properly and ruined Old bits of sandpaper that are no longer useful The trash from packaging and things like the inside of tape etc Then take a moment so that things are organized and can be found easily
Category: Workshop
AMT275 DeWALT DCB203 20V Max Lithium Ion Battery Pack
Make/Model: DeWALT DCB203 Documentation: https://servicenet.dewalt.com/documents/English/Instruction%20Manual/N444397,DCB203.pdf Location: The Workshop Photos: Status
AMT277 DeWALT DCD796 Hammerdrill
Make/Model: DeWALT DCD796 Documentation: https://www.2helpu.com/DEWALT/GB/en-GB/Product/ProductDetail?id=10527 Location: The Workshop Photos: Status
AMT276 DeWALT DCF887 1/4″ Cordless Impact Driver
Make/Model: DeWALT DCF887 Documentation: https://www.2helpu.com/DEWALT/GB/en-GB/Product/ProductDetail?id=10526 Location: The Workshop Photos: Status
AMT183 Plywood dolly
Documentation: Manual See below for a video on how to use a plywood dolly https://www.youtube.com/watch?v=S3MuakPtqqQ
AMT274 DeWALT DCB115 12V/20V Max Lithium Ion Battery Charger
Make/Model: DeWALT DCB115 Documentation: https://www.manualslib.com/manual/1255366/Dewalt-Dcb115.html#manual Location: The Workshop Photos:
Troubleshooting Table Saw Power
If you’re having trouble getting the table saw to power up, the first thing to do is make sure power is configured correctly. The tablesaw can only be plugged into the big black cord reel directly above it. None of the other power outlets have the capacity for the tablesaw. If this is correct, …
Workshop Office Hours
Out of Date This was an experiment that never got traction. Office hours are hosted in the workshop to provide members assistance with their projects and in navigating the shop itself. Office hour hosts are there to promote community within the organization and good practices within the Workshop. Members can get advice on a …
How to clean the shop dusting tools
There are several tools along the wall with the bandsaw used for mega dusting. They may need cleaning. Extra Dust Covers can be found in the grey supply closet. Take the dirty one’s home and wash them. Then bring them back.
Workshop Finishing Guidelines
Please note that these rules are provisional, and subject to change at any time Any spraying of accelerated materials is strictly limited – spraying for more than 15 seconds in a 30 minute window is prohibited. this is to facilitate the use of products like accelerator for CA glue not painting surfaces. The use …