Category: Workshop

Drill press vise

Used to hold small parts on the table of the drill press. Some have a tilting base to enable drilling angled holes. Typically it is not attached to the table to allow easy alignment of the part and the drill bit. Something like [http://www.harborfreight.com/4-inch-jaw-capacity-drill-press-vise-30999.html this]

Read more

Dust Collection

This is way way OOD as of August 2021. It would be a good place to have a nice write up about dust collection in the shop. ~ Crafty Rachel See posts for related topics This is way way OOD as of January 2020. It would be a good place to have a nice write …

Read more

How to Wax Tools

This guide covers the Jet Band Saw, Jointer, Planer]”’ Materials: Johnson Paste Wax located in the flammables cabinet. Required Permission: Must be certified to use the tool you are waxing. Steps: Unplug tool Clean all exposed cast iron or steel surfaces with steel wool. Do not scrub aluminum parts. Apply wax to the cheap paper towel. …

Read more

AMT179 Ryobi Router

Make/Model: R163 – 1 1/2 PEAK HP FIXED BASE ROUTER | RYOBI Tools Documentation: ryobi-router-R163 General Information What is a router? The router[a] is a power tool with a flat base and a rotating blade extending past the base. The spindle may be driven by an electric motor or by a pneumatic motor. It routs (hollows out) an area in hard material, such as wood or …

Read more