This sled is designed to safely make crosscuts while supporting both sides of the piece (the keeper and the discard sides). Setup Unplug the table saw Remove the yellow throat plate Use a 10mm wrench to loosen the two nuts which clamp the blade guard Remove the blade guard and re-tighten the nuts so they …
Make/Model Branson B Series tabletop Ultrasonic Cleaner No lid, lid is not required Manual Photos Logs
Make/Model: Janome HD-3000 Documentation: Janome HD-3000 Manual Demo: See video below See Janome HD3000 Machine Storage & Setup Standards for a complete list of the accessories including feet, tools, and more. The Janome HD-3000 is a solid sewing machine, perfect for a beginner or sewist looking to do a wide range of sewing. These machines …
Make/Model: Janome HD-3000 Documentation: Janome HD-3000 Manual Demo: See video below See Janome HD3000 Machine Storage & Setup Standards for a complete list of the accessories including feet, tools, and more. The Janome HD-3000 is a solid sewing machine, perfect for a beginner or sewist looking to do a wide range of sewing. These machines …
Make/Model: Janome HD-3000 Documentation: Janome HD-3000 Manual Demo: See video below See Janome HD3000 Machine Storage & Setup Standards for a complete list of the accessories including feet, tools, and more. The Janome HD-3000 is a solid sewing machine, perfect for a beginner or sewist looking to do a wide range of sewing. These machines …
Ironing and pressing are important steps in making sewn and quilted creations look polished. Here are some reasons why: It’s impossible to make your items look polished without a good pressing. Especially when making tailored pieces and using fabrics like wool or tweed. Seams simply will not lie flat unless pressed, and you cannot achieve …
Out of Date This was an experiment that never got traction. Office hours are hosted in the workshop to provide members assistance with their projects and in navigating the shop itself. Office hour hosts are there to promote community within the organization and good practices within the Workshop. Members can get advice on a …
Please note that these rules are provisional, and subject to change at any time Any spraying of accelerated materials is strictly limited – spraying for more than 15 seconds in a 30 minute window is prohibited. this is to facilitate the use of products like accelerator for CA glue not painting surfaces. The use …
This is posted as a resource for members to teach the Introduction to the AMT Shops class. Any member experienced and comfortable in the workshop, or who has taken this class, may teach it. Taking or teaching this class counts as a member’s monthly contribution. Do not skip any sections below. Ace Makerspace Basics Ace …
Make monthly contributions to the maintenance and usability of the space. Always wear proper attire and use Personal Protection Equipment (PPE). Always check your wood with the metal detector, especially if you got it from the scrap bin or if it is reclaimed. Always follow certification rules. The only equipment you are certified on. When …
