This is post is applicable to the old CNC Router that we sold in 2022. It is not applicable to the new CNC Router.

 

Mach 4 Setup Notes – Large CNC Router

Motor 0 is X

Motor 1 is Y

Motor 2 is Z

Input Signals

Motor 0 ++ Limit is Port 1 Pin 11

Motor 0 – – Limit is Port 1 Pin 10

Motor 1 – – Limit ia Port 1 Pin 12

Motor 1 ++ Limit is Port 1 Pin 13

Motor 2 ++ Limit is Port 1 Pin 15

Break Out Box: Ethernet Smooth Stepper

Links:

Setting up Smooth Stepper: [https://warp9td.com/index.php/gettingstarted/setting-up-the-smoothstepper-and-mach4#ESSPluginConfiguration https://warp9td.com/index.php/gettingstarted/setting-up-the-smoothstepper-and-mach4#ESSPluginConfiguration]

Mach 4 Operation Manual: [http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Operation%20Manual.pdf http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Operation%20Manual.pdf]

Mach 4 Installation Manual: [http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Installation%20Manual.pdf http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Installation%20Manual.pdf]

Ethernet Smooth Stepper Documentation: [https://warp9td.com/index.php/documentation/doc-ess#SetupTesting https://warp9td.com/index.php/documentation/doc-ess#SetupTesting]

ESS Setup with Mach 4: [https://warp9td.com/index.php/gettingstarted/setting-up-the-smoothstepper-and-mach4#ESSPluginConfiguration https://warp9td.com/index.php/gettingstarted/setting-up-the-smoothstepper-and-mach4#ESSPluginConfiguration]