Loading asset information.
This shop vac is used to clean the laser cutter: AMT266
Make/Model: RIDGID Model # WD3050
Replacement filter:
Back up filters are kept on the grey laser supplies shelves. If you use the last one or there is no backup filter there please send a message to @teamlaser so they can order more.
VF3600 5-Layer Allergen Pleated Paper Filter (because we are cleaning fine dust and powder out of the laser venting system its important that we are using a fine enough filter on the shop vac as to not blow stuff back into the space.)
Cost: $20, Home Depot. RIDGID’s pleated paper filters are fully washable and reusable if dried properly.
Fits but not recommended for current use:
VF3400 (general purpose) or VF3501 (dry dust bag type)
Documentation:
Basic Care guide pdf: https://www.homedepot.com/catalog/pdfImages/3b/3bda542d-d7b1-4a3a-bdc5-3db3d900fb6d.pdf
Maintenence:
- Empty the barrel
- Clean the filter
- Replace the filter if needed
- If there are none on the shelf contact the Team. (there should be one stocked at all times)