Some parts and supplies in the workshop are 3D printed.  This page contains all of them.

Laguna Bandsaw Dust Deflector Insert

The Laguna bandsaw (AMT399) has a plastic insert just under the table.  It crosses the blade and deflects sawdust toward the dust collection port.  It’s an important part because it helps prevent sawdust from building up on the tires, which will ruin them.

The part is found online here:

https://www.printables.com/model/850077-dust-collection-insert-block-for-laguna-1412-and-1

There is a supply of them in the closet in the band saws box among the steward supplies.

Table Saw Riving Knife Keeper

The DeWalt DW746 Table Saw (AMT273) has a removable safety guard and riving knife.  We use a keeper to retain the positions of the nuts that secure the riving knife, to make it easier to restore the riving knife to its proper location.

The part is found online here:

https://www.printables.com/model/1276531-riving-knife-keeper-for-dewalt-dw746-table-saw

There is a supply of them in the closet in the table saw box among the steward supplies.

Clamp Pads

The pads on the end of a clamp’s screw sometimes come off.  This happens if someone continues to loosen the clamp when the clamp pad has bumped against the body of the clamp.  Once they have come off they are damaged and it is difficult to keep them on ever again.

These are replacement pads.  A coin can be inserted in them if more clamping force is needed.  There are a variety of sizes for different sized clamps. Full details are in the online page at printables.  We use the 120% size for our small clamps.

The part is found online here:

https://www.printables.com/model/1275656-stronger-clamp-pads

There is a supply of them in the closet in the box with “clamp pads” on it, among the steward supplies.