This is post is a rough draft about how to run the home sequence on the FS CNC Router.

Steps to Turn on the Machine and Run the Home Sequence

1. Check Estop is not engaged.
   • Ensure the red button of the Estop is pulled out. The CNC Router will not turn on when the Estop is engage. If Estop is engaged, then twist red button of the Estop to release.
2. Press green button (hold for 3 seconds)
3. Start up the Centroid software on the Ace computer.  (Icon Pic)
4. Hit reset button (pic)
5. Confirm the homing program is loaded in the CNC Control Software- red button (Pic)
6. Hit cycle/start to home machine (Pic)